Remote Screen Indicators
Information is displayed when the remote controller is powered up.
AUTO
COOL
DRY
Note:
All indicators shown in the figure are intended to be clear.
But during the actual operation, only the relative function signs are shown on the
display.
Mode display
AUTO
FAN
HIGH
Displayed when data transmitted.
The indicator displays when the
LOW
remote is enabled and can send
signals to the unit. To turn o the
remote without a ecting the unit,
point it away and press the ON/OFF
button. To turn the remote back on,
repeat the same action. If this
indicator is not illuminated, the unit
will not receive commands from
the remote.
Displayed when TIMER ON time is set
Displayed when TIMER OFF time is set
Shows set temperature or room
temperature, or time under TIMER
setting
Indicates all the current settings are
locked
Displayed when ComfortSense
feature is activated(on some models)
Displayed when SLEEP feature is
activated
Fan speed indication
HIGH
LOW
NO display
27
DRY
COOL
FAN
High speed
Low speed
Auto fan speed
Need help?
Do you have a question about the MAP05S1AWT-A and is the answer not in the manual?