Midea MAP05S1AWT-A User Manual page 5

CAUTION
This unit is not intended for use by persons (including children) with reduced physical,
sensory, or mental capabilities, or those lacking experience and knowledge, unless they
have received supervision or instruction concerning its use from a person responsible
for their safety. Children should be supervised to ensure they do not play with the unit.
Children must be monitored around the unit at all times.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly quali ed persons in order to avoid a hazard.
Do not use this unit for functions other than those described in this instruction manual.
Disconnect the power if strange sounds, smell, or smoke are present.
Do not press the control panel buttons with anything other than fingers.
Do not remove any fixed covers. Never use this unit if it is not working properly,
or if it has been dropped or damaged.
Do not operate or stop the unit by inserting or pulling out the power cord plug.
Do not use hazardous chemicals to clean or come into contact with the unit. Do not
use the unit in the presence of inflammable substances or vapor(i.e. alcohol,
insecticides, petrol etc.)
Prior to cleaning or other maintenance, the unit must be disconnected from the
supply mains.
Do not remove any fixed covers. Never use this unit if it is not working properly, or
if it has been dropped or damaged.
Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or
similar coverings. Do not route cord under furniture or appliances. Arrange cord away
Do not operate unit with a damaged cord, plug, power fuse or circuit breaker. Discard
unit or return to an authorized service facility for examination and/or repair.
To reduce the risk of re or electric shock, do not use this fan with any solid-state
speed control device.
The unit shall be installed in accordance with national wiring regulations.
Contact the authorized service technician for repair or maintenance of this unit.
Do not cover or obstruct the inlet or outlet grilles.
Always transport the air conditioner in a vertical position and stand on a stable, level
surface during use.
Always contact a quali ed person to carry out repairs. If the damaged power supply
cord must be replaced, use a new power supply cord obtained from the product
manufacturer. Do not repair the damaged cord.
Hold the plug by the head of the power plug when taking it out.
5