F-SECURE CLIENT SECURITY 7.00 Administrator's Manual page 282

282
[Silent Setup]
DestinationDirUnderProgramFiles=F-Secure
Reboot=2
[FSMAINST.DLL]
RequestInstallMode=1
ManagementKey=\\server\path\admin.pub
ManagedStandAlone=
Settings for unattended automatic installation
Default destination path. Do not change this
setting unless your company follows a specific
installation policy.
1 = Reboot automatically after installation.
Attention: this option executes a "forced reboot" at
the host without prompting the user to save his/
her work. Do not use this option until you are
absolutely sure about the safety of this type of
reboot for the target computer.
2 = Reboot after prompting the user for a
confirmation. Note: This choice executes a
"normal reboot" at the host, and therefore, in
some cases, the user could delay the restart, and
also completely prevent it.
(default)
3 = Do not reboot after installation.
Settings for F-Secure Management Agent
This component is always installed when you are
installing a networked client. You do not need to
edit the RequestInstallMode or InstallMode
settings for this component.
Location of the management public key.
Meaningful only in stand-alone installations.
0 = Normal stand-alone installation, no policy files
can be imported. (default)
1 = Installed components can be managed with
manually imported policies.