Enabling E-Mail Scanning For Incoming And Outgoing E-Mails - F-SECURE CLIENT SECURITY 7.00 Administrator's Manual

176
5.6.2 Enabling E-mail Scanning for Incoming and Outgoing
E-mails
Step 1.
Step 2.
Step 3.
For more information on virus alert and scanning error messages that can
be displayed to end users when e-mail scanning is enabled, see
Scanning Alert and Error
In this example e-mail scanning is enabled for both incoming and
outgoing e-mails.
1. Select the Root in the Policy Domains tab.
2. Go to the Settings tab and select the E-mail Scanning page.
Configure Incoming E-mail Scanning
1. Select Enable Incoming E-mail Scanning.
2. Select the action to take from the Action on incoming infected
attachment drop-down list. For explanations on the different actions,
see "E-mail Scanning Configuration
3. Select the action take from the Action on scanning failure drop-down
list.
4. Select the action to take from the Action on malformed message parts
drop-down list.
Configure Outgoing E-mail Scanning
1. Select Enable Outgoing E-mail Scanning.
2. Select the action to take from the Action on incoming infected
attachment drop-down list.
3. Select the action take from the Action on scanning failure drop-down
list.
4. Select the action to take from the Action on malformed message parts
drop-down list.
Messages", 292.
Settings", 173.
"E-mail