Local Installation - F-SECURE CLIENT SECURITY 7.00 Administrator's Manual

156
Non-JAR Approach
4.5

Local Installation

/password:secret (variation: /password:"secret with spaces")
— Specifies the password of the user account.
The ilaunchr functionality stays the same if neither of these two
parameters is given. If only one of the parameters is given, ilaunchr
returns an error code. If both parameters are given, Ilaunchr starts the
Setup program.
An example of the command:
ILaunchr <jar file> /user:domain\user_name /
password:secret_word
1. Copy the appropriate installation files to an installation directory (the
installation files can be found in the CD-ROM's
\software\<application>\ directory, e.g. F-Secure Client Security 6.0
files are in the directory \software\fsavcs\.
2. Copy the admin.pub file to the same installation directory as above.
3. Edit the prodsett.ini file. This file tells the setup program which
modules it should install and where to install them (the target
directory) on the workstations. For more information on editing the
Prodsett.ini file, see "Modifying
4. Add the following line to the login script:
setup.exe\silent /checkFSMA
If the parameter /checkFSMA is not used, the installation will be run
every time runsetup.exe is executed.
This section contains system requirements for F-Secure Client Security
and information on providing a copy of the Admin.pub key file to
workstations.
PRODSETT.INI", 278.