Disabling Application Control Pop-Ups - F-SECURE CLIENT SECURITY 7.00 Administrator's Manual

216
Step 2.
Step 3.
Step 4.
Step 5.
6.5.5

Disabling Application Control Pop-ups

Edit the Application Rule Type
1. Select the action to take when the application acts as a client and
tries to make an outbound connection. In this case select Allow for
Act as Client (out).
2. Select the action to take when the application acts as a server and an
inbound connection attempt is made.
Select the Message Shown to Users
Select whether a message is shown to users when a connection attempt
is made.
Select the New Rule Target
1. Select the domain or host that the rule affects. In this case select
Engineering/Testing.
If the target host or domain already has a rule for any of the
applications affected by the rule, you are prompted to select
whether to proceed and overwrite the existing rule at the host.
2. When the rule is ready, click Finish. The modified rule is now
displayed in the Application Rules for Known Applications table. It is a
copy of the original rule with the changes you just made.
Take the New Rule into Use
1. Click to save the policy data.
2. Click to distribute the policy.
When you want to configure Application Control in such a way that it is
totally transparent to the end users, all pop-ups have to be disabled. This
is done as follows: