Configuring A Default Security Level For The Managed Hosts - F-SECURE CLIENT SECURITY 7.00 Administrator's Manual

6.2.2 Configuring a Default Security Level for the Managed
Hosts
You can verify that the new security level change has become effective by
going to the Status tab and selecting the Overall Protection window.
If the selected security level cannot be used for some reason, the
default security level is used instead. The current default security
level can be seen in the Global Security Levels table on the
Firewall Security levels page.
Default security level is a global setting, and it is used only if the otherwise
selected security level is disabled.
In this example the Office security level is configured as default for all the
hosts in the domain.
1. Select the Laptops/Eng. domain in the Policy Domains tab.
2. Go to the Settings tab and select the Firewall Security Levels page.
3. In the Firewall Security Levels table click the Default radio button on
the Office row.
4. Policy Manger prompts you to confirm the security level change for all
managed hosts. Click OK.
5. Click to save the policy data.
6. Click to distribute the policy.
CHAPTER 6 199