F-SECURE ANTI-VIRUS LINUX SERVER SECURITY Administrator's Manual page 69

E-mail Settings
The e-mail settings are used for all alert messages that have been
configured to send e-mail alerts.
Server
From
Subject
Alert Message Variables
The following table lists all variables that are available for the e-mail alert
message subject.
Variable
%SEVERITY%
%HOST_DNS%
%HOST_IP%
%USER%
%PRODUCT_NAME%
Enter the address of the SMTP server in the
Server Address field. You can use either the
DNS-name or IP-address of the SMTP server.
If the mail server is not running or the network is
down, it is possible that some e-mail alerts are lost. To
prevent this, configure a local mail server to port 25
and use it for relaying e-mail alerts.
Enter the full e-mail address
(sender@example.com) you want to use as a
sender of the alert in the e-mail message.
Enter the e-mail alert message subject. Use
%DESCRIPTION% as the subject to display a short
description of the alert in the subject line.
Description
The severity of the alert: informational,
warning, error, fatal error or security alert.
The DNS address of the host that sent the
alert.
The IP address of the host that sent the alert.
The active user login name.
The name of the product that generated the
alert.
CHAPTER 6 67