F-SECURE ANTI-VIRUS LINUX SERVER SECURITY Administrator's Manual page 24

22
chmod a+x f-secure-linux-server-security-<version>.<build>
3. Run the following command to start the installation:
./f-secure-linux-server-security-<version>.<build>
The setup script will display some questions. The default value is
shown in brackets after the question. Press
default value.
4. Select the language you want to use in the web user interface during
the installation.
Select language to use in Web User Interface
[1] English (default)
[2] Japanese
[3] German
5. The installation displays the license agreement. If you accept the
agreement, answer
yes
6. Enter the keycode to install the full, licensed version of the product.
Enter the keycode in the format you received it, including the hyphens
that separate sequences of letters and digits:
If you are installing the evaluation version and do not have a keycode,
press .
ENTER
7. Type to select the centrally managed installation.
C
8. Enter the address of the F-Secure Policy Manager Server.
Address of F-Secure Policy Manager Server:
[http://localhost/]:
9. Enter the location of the admin.pub key. This is the key that you
created during F-Secure Policy Manager Console Installation.
Give the admin.pub file location [/root/admin.pub]:
You can use the TAB key to complete directory and file names
when you enter the file name.
10. Select whether you want to allow remote accesses to the web user
interface.
Allow remote access to the web user interface? [no]
ENTER
and press to continue.
ENTER
to select the