F-SECURE ANTI-VIRUS LINUX SERVER SECURITY Administrator's Manual page 158

156
ON DEMAND UPDATE OVER NETWORK
Use the dbupdate command (without any parameters) if
there is a need to check new database updates immediately
over the network and take new databases into use.
SCHEDULED UPDATE OVER NETWORK
Typically, dbupdate is started from cron(8) frequently with the
following command: dbupdate --auto. This takes into use
updates that F-Secure Automatic Update Agent has the pre-
viously downloaded.
OPERATION
If new databases are available, database files are copied to
updatedirectory. Database files are then validated using
daastool and dbtool. After the validation, database files
are copied to databasedirectory using the fsav
--dbupdate=updatedirectory command.
ERROR CODES
If update with F-Secure Automatic Update Agent fails,
an error message
Database update failed. Error code: XX
with one of the following errorcodes will be printed:
2
30
Connection to AUA daemon timed out.
Try restarting AUA daemon.
Could not connect to AUA daemon. Per-
haps AUA daemon is not running.