F-SECURE ANTI-VIRUS LINUX SERVER SECURITY Administrator's Manual page 102

100
rpm -qa | grep f-secure
rpm -qa | grep fsav
b. Remove installed packages. Run the following command for each
installed package:
rpm -e --noscripts <package_name>
c. 3. Remove all of the product installation directories:
rm -rf /var/opt/f-secure/fsav
rm -rf /var/opt/f-secure/fsma
rm -rf /etc/opt/f-secure/fsav
rm -rf /etc/opt/f-secure/fsma
rm -rf /opt/f-secure/fsav
rm -rf /opt/f-secure/fsma
Q. System is very slow. What is causing this?
A. The real-time virus scan and Integrity Checking can slow down the
system.
›
Use the basic Linux tools (top and vmstat) to check what is
slowing down the system.
›
Make sure that you are using the dazuko version that is shipped
with the product.
›
If a file that is accessed often is time-consuming to scan, consider
adding it to the excluded list. For more information, see
"Real-Time Scanning", 40.
›
If you are using the centralized administration mode, make sure
that the DNS queries return addresses quickly or use IP
addresses with F-Secure Policy Manager.