Stand-Alone Installation - F-SECURE ANTI-VIRUS LINUX SERVER SECURITY Administrator's Manual

3.2.1

Stand-alone Installation

Centrally managed installation is the recommended installation
mode when taking the product into use in a large network
environment.
For installation instructions, see
21.
›
For information on how to install the product on multiple
computers, see
›
For information on how to install the product in the unattended
mode, which does not ask any questions during the installation,
see "Unattended
IMPORTANT: If you have some other vendor's antivirus software
installed on the computer, you must uninstall it before installing the
product.
During the installation, you must have a compiler and the kernel source
installed. Read the documentation of your distribution on how to check
that the required tools are installed. For some common
distribution-specific instructions how to install required tools to the
computer, see "Installation
It is recommended to use the default settings during the installation. To
select the default value, press
installation.
Follow these instructions to install the product in stand-alone mode. You
will need to install the product using an account with root privileges.
1. Copy the installation file to your hard disk. Use the following
command to extract the installation file:
tar zxvf f-secure-linux-server-security-<version>.<build>.tgz
2. Make sure that the installation file is executable:
chmod a+x f-secure-linux-server-security-<version>.<build>
3. Run the following command to start the installation:
./f-secure-linux-server-security-<version>.<build>
"Centrally Managed
"Replicating Software Using Image
Installation", 27.
Prerequisites", 79.
to any question during the
ENTER
CHAPTER 3
Installation
Installation",
Files", 26.
19