Unattended Installation - F-SECURE ANTI-VIRUS LINUX SERVER SECURITY Administrator's Manual

3.7

Unattended Installation

1. Type the following command:
./f-secure-linux-server-security-<version>.<build> rpm
2. Install RPM packages.
IMPORTANT: The /opt/f-secure/fsav/fsav-config script must be
executed after the RPMs have been installed, otherwise the
product will not operate.
You can install the product in the unattended mode. In unattended mode,
you provide all the information on the installer command line (or
command line, if you install from RPM packages). The
fsav-config
unattended installation mode asks no questions during the installation.
Use the following command line switch during the installation:
--auto MODE [fspms=FSPMSURL adminkey=/PATH/TO/ADMIN.PUB]
lang=en|de|ja [no]remotewui [no]locallogin user=USER
kernelverify|nokernelverify pass=PASSPHRASE keycode=KEYCODE
Where is
MODE standalone
centrally managed installation.
If is , you have to provide the URL to F-Secure Policy
MODE managed
Manager Server and the location of the administrator public key, for
example: fspms=http://fspms.company.com/ adminkey=/root/admin.pub
Use the following options in the command line:
lang
remotewui
noremotewui
nolocallogin
for the standalone installation or
Select the language for the web user interface.
Allow remote access to the web user interface.
Do not allow remote access to the web user
interface.
Allow local access to the web user interface
without login.
CHAPTER 3
Installation
for the
managed
27