Installing Ppd File From The Command Line - Xerox Phaser 6120 Reference Manual

Installing PPD File From the Command Line

Before proceeding with the installation, be sure to exit all running
applications.
Root privileges are required in order to install ppd file.
1 Copy the ppd file from the CD-ROM to the directory "/usr/share/cups/
model/".
2 Remove Administrator restrictions. Edit the /etc/cups/cupsd.conf by
commenting out of the following lines under Location/Admin: AuthType,
AuthClass, AuthGroupName (SuSe only).
3 Restart CUPS. At a command prompt, enter "/etc/init.d/cups restart"
Installing PPD File From the Command Line
A ppd file for each language is available in the corresponding
"drivers/linux/ppd/<language>" folder on the Software and
Documentation CD-ROM. Use the appropriate ppd file for the
language.
99