Xerox Phaser 6120 Reference Manual page 177

EtherTalk
The Network/EtherTalk/Bonjour window provides the following parameters
for configuration:
Item
Enable EtherTalk
Printer Name
Netzone
Enable Bonjour
Bonjour Printer Name Identifies the printer name.
Localhost Name
Save Changes
166
Description
When selected, enables the parameter settings for
EtherTalk.
Default: [Checked]
Identifies the printer name.
Range: Up to 32 characters
Default: Phaser 6120
Identifies the zone where the printer is located.
Range: Up to 32 characters
Default: *
When selected, enables the parameter settings for
Bonjour.
Default: [Checked]
Range: Up to 63 characters
Default: Phaser 6120(xx:xx:xx)
Text box for localhost name change.
Range: Up to 63 characters; may contain only
letters, digits, and hyphens. Must begin and end
with a letter or digit.
Default: Phaser6120-xxxxxx
Saves and applies any changes made.
Configuring the Printer