Xerox Phaser 6120 Reference Manual page 140

Item
Color Mode
Toner Out Action
Density Control
Save Changes
Discard Changes
Set as Default button
Restore Default button Restores the Custom values to the ones saved in
Restore Factory button Changes all settings to the Factory values.
Configuring the Printer
Description
Sets the mode to use color or monochrome output.
Choices: Color, Grayscale
Default: Color
Configuration Menu Equivalent:
MENU SYSTEM DEFAULT/COLOR
MODE
Determines if the printer continues accepting jobs
sent to it when a low toner condition occurs.
Choices: Stop, Continue
Default: Stop
Configuration Menu Equivalent:
MENU QUALITY MENU/TONER OUT
ACTION
Adjusts toner (color) density of each color (cyan,
magenta, yellow, and black). The higher the value,
the higher the density of the color.
Range: 1 - 5
Default: 3
Configuration Menu Equivalent:
MENU QUALITY MENU/DENSITY
CONTROL
Saves and applies any changes made.
If you made changes to any of the parameter
settings but do not wish to apply the changes,
selecting this button restores the last submitted
parameter settings.
Saves the changes made to Custom values.
custom defaults.
129