Xerox Phaser 6120 Reference Manual page 136

Item
Print Mode Settings
Duplex Mode
Page Orientation
Jam Recovery
Configuring the Printer
Description
Duplex printing enables you to print on both sides of
the media. Choices are
Off: Prints simplex pages.
Short edge: Prints duplex pages so pages can be
bound at the short edge.
Long edge: Prints duplex pages so pages can be
bound at the long edge.
Choices: Off, Short edge, Long edge
Default: Off
Configuration Menu Equivalent:
MENU PAPER MENU/DUPLEX
A duplex unit must be installed to use the
duplex feature.
Identifies the page orientation that the printer should
use. Choices are
Portrait: Vertical orientation (longest side of
media vertical)
Landscape: Horizontal orientation (longest side
of media horizontal)
Choices: Portrait, Landscape
Default: Portrait
Configuration Menu Equivalent:
MENU PAPER MENU/ORIENTATION
When this feature is enabled (On), following the
clearing of a media jam the printer reprints any
pages that did not progress to the output bin when
the media jam occurred.
Choices: Off, On
Default: On
Configuration Menu Equivalent:
MENU PAPER MENU/PAGE
RECOVERY
125