SNMP
The Network/SNMP window provides the following parameters for
configuration:
Item
Enable SNMP
SNMP
GET
SNMP
SET
Save Changes
Discard Changes
170
Description
If selected, enables the parameter settings for
SNMP.
Default: [Checked]
Community Sets the IP community of the printer.
Range: Up to 32 characters
Default: public
Access
Identifies Read or Write access.
Community Sets the IP community of the printer.
Range: Up to 32 characters
Default: private
Access
Identifies Read or Write access.
Saves and applies any changes made.
If you made changes to any of the parameter
settings but do not wish to apply the changes,
selecting this button restores the last submitted
parameter settings.
Configuring the Printer