Xerox Phaser 6120 Reference Manual page 174

Item
IP Address
Subnet Mask
Default Router
Automatic
IP Settings
Printing
Protocols
Save Changes
Discard Changes
Configuring the Printer
Description
Sets the IP address.
Default: 192.168.1.2
Configuration Menu Equivalent:
Sets the subnet mask address.
Default: 000.000.000.000
Configuration Menu Equivalent:
Sets the default router IP address.
Default: 000.000.000.000
Configuration Menu Equivalent:
Enable Selecting this check box enables DHCP.
DHCP/ Default: [Checked]
BOOTP Configuration Menu Equivalent:
Enable Selecting this check box enables PING/ARP.
PING/ Default: [Checked]
ARP
Enable Selecting this check box enables automatic IP
AUTO IP detection.
Default: ON
Configuration Menu Equivalent:
Enable Selecting this check box enables FTP.
FTP Default: [Checked]
Enable Selecting this check box enables Port 9100.
Port 9100 Default: [Checked]
Saves and applies any changes made.
If you made changes to any of the parameter settings
but do not wish to apply the changes, selecting this
button restores the last submitted parameter settings.
MENU INTERFACE MENU/ETHERNET/
TCP/IP/IP ADDRESS
MENU INTERFACE MENU/ETHERNET/
TCP/IP/SUBNET MASK
MENU INTERFACE MENU/ETHERNET/
TCP/IP/DEFAULT ROUTER
MENU INTERFACE MENU/ETHERNET/
TCP/IP/DHCP/BOOTP
MENU INTERFACE MENU/ETHERNET/
TCP/IP/ENABLE AUTO IP
163