Alienware AW2725Q Teardown Manual page 6

Stand
Removing the stand
Prerequisites
1. Follow the procedure in
NOTE: To prevent the LCD screen from scratches during stand removal, ensure the monitor is positioned on a soft surface
and handled carefully.
NOTE: The following steps are specifically for removing the stand that is shipped with your monitor. If you are removing a
stand that you purchased from any other source, follow the setup instructions that are included with the stand.
Steps
1. Place the monitor on a clean, flat surface on a soft cloth or cushion.
2. Press and hold the stand release button at the back of the display.
3. Lift the stand assembly up and away from the monitor.
6 Disassembly and reassembly
Before working inside your monitor.
Figure 1. Removing the stand
Figure 2. Removing the stand