Advertisement
3.
Align and place the power board in the slot inside the metal shield.
4.
Replace the three screws (M3x9) to secure the power board to the metal shield.
Next steps
1.
Install the
interface
board.
2. Install the
DC-DC
board.
3.
Install the
switch
board.
4.
Install the
metal
shield.
5.
Install the
back
cover.
6.
Install the stand.
7.
Follow the procedure in
30
Disassembly and reassembly
Figure 38. Installing the power board
After working inside your
monitor.
Advertisement
Need help?
Do you have a question about the AW2725Q and is the answer not in the manual?