Alienware AW2725Q Teardown Manual page 26

Installing the interface board
Steps
1. Adhere the thermal pad on the interface board.
2. Place the spacer on the interface board.
3. Align and place the interface board in the slot inside the metal shield.
4. Replace the five screws (M3x9) to secure the interface board to the metal shield.
Next steps
1. Install the DC-DC board.
2. Install the switch board.
3. Install the metal shield.
4. Install the back cover.
5. Install the stand.
6. Follow the procedure in
26 Disassembly and reassembly
Figure 31. Installing the interface board
Figure 32. Installing the interface board
After working inside your monitor.