Using The Carabiner Clip; Low Battery Alert; Belt Clip; Back Light - Uniden UH506SX-2NB Owner's Manual

Getting Started

Belt Clip

To attach the belt clip:
Slide the belt clip until it snaps into place.
To remove the belt clip:
To remove the belt clip, slightly lift the belt clip locker and slide the belt clip at
the same time until released.

Using the Carabiner Clip

Use the carabiner clip to conveniently secure the UH506SX-2NB to a belt or
strap.

Low Battery Alert

If the battery level becomes low, the battery indicator icon on the display
begins flashing. When the batteries in the unit are low, the unit
will go into a battery low mode. The Transmit
mode is disabled. Replace the alkaline
batteries immediately or if you are using the
NiMH battery pack, place the radio on the
charge cradle to recharge. Full charge will take
up to 16 Hrs.

Back Light

The UH506SX-2NB has an automatic display back light which remains on for
10 seconds after a key press (all keys except PTT key). The back light will
work even if the keypad is locked but will not work during low battery alert
mode.
4
UNIDEN UH506SX-2NB UHF CB Radio