SevenSport s.r.o. reserves the right to make any changes and improvements to its product without prior notice. Visit our website www.insportline.eu where you will find the latest version of the manual. SAFETY INSTRUCTIONS • Read the manual carefully and keep it for future reference.
• Any part of the treadmill cannot prohibit the movement of the user. • Do not use outdoors. • Do not expose to direct sunlight. • Do not place in areas with high humidity (pools, sauna etc.) • Continuous use cannot be longer than 2 hours. •...
PARTS LIST Name Qty. Name Qty. Base Washer 30*30*20 Left post Motor washer 42.7*15*10 Right post Console washer 239*10*2 Incline frame Oil tank Silicone cylinder Ø9*180 Incline frame bracket Main frame Display top cover Console holder Console bottom cover Left handle Console top cover Right handle LED panel...
Page 7
Left side step Speaker Right side step Communication motherboard Nylon slider Upper communication cable Security key fastening cover Intermediate communication cable Tablet holder Bottom communication cable Transport wheels Bottom control panel Flat washer Ø6.2*13*T1.2 Transport wheels Washer Ø10.2*Ø20*ØT1.5 Plastic tube Washer Ø25* Ø4.2*4.5 Spring washer Ø6.2*Ø10*T2.0 Washer Ø4.2*Ø11*ØT0.5...
Heart rate cable Cross screw ST4.0*10 Speaker Cross screw ST2.3*4 Phillips screw 2.5*6 Safety key Cross screw ST 4.2*16 Cross screw ST4.2*25 Manual SPECIFICATIONS Weight 90 kg Running surface 135*52 cm Unfolded dimension 169,5*86*148,5 cm Motor power Brushless 4,5 hp 1,0 –...
Page 9
Step 1 Fix the left post with M8*16 bolts. Step 2 Connect the communication cables leading from the main frame to the cables from the right pillar. Attach the right post with M8*16 bolts. Step 3 Connect the communication cables from the right post to the control panel. Attach the control panel to the posts with M8*16 bolts.
Page 10
Step 4 Attach the side covers to the bottom of the posts. Step 5 Connect the communication cables from the control panel to the display. Fix the display to the control panel with M8*30 bolts.
Page 11
Step 6 Unscrew the bolt M8*30. Step 7 Lift the running surface and unscrew the bolt M8*16 and remove the packaging fixed tube. Then place back the running surface by carefully kicking the piston joints holding the running surface.
Page 12
Step 8 After assembly is complete, make sure all connections are properly tightened. Step 9 Connect the power cord and plug into the power supply. Turn the main switch to the on position. Connect the safety key to the control panel and then to the clothes. Select a program and start exercising.
Page 14
Turn counter-clockwise to decrease the incline Speed 4 / 8 / 12 km/h Press to select the speed Incline 3 / 6 / 9 Press to select incline PROGRAMS There are: manual program, 12 preset programs (P1 – P12), countdown programs (time, distance, calories), body fat test (FAT).
Page 15
Incline Speed Incline Speed Incline Speed Incline Speed Incline Speed Incline Speed Incline Speed Incline Speed Incline Speed Incline BODY FAT TEST (FAT) In standby mode, press the PROG button to select the FAT program. It is necessary to set the values F1 - F4 in the program.
OTHER If you pull out the safety key during operation, the treadmill will stop, an audible signal will sound, and the display will show " --- ". After connecting the key, the treadmill can be used again. After 10 minutes of inactivity, the treadmill switches to power saving mode. Press any button to start the treadmill again.
exercising. If you use the treadmill often, you can choose regular walking speed or jogging speed. If you have no experience or aren’t sure what the best initial speed for you is, refer to the data below: Speed 1 - 3.0 km/h people with weak constitution Speed 3.0 - 4.5 km/h people who do not exercise often...
All you need is a pair of shoes, which let you stretch your feet fully and at the same time don’t stick to foreign matters under your shoe’s soles, so that you do not carry dirt onto the running belt and running board.
• Consult your doctor before starting training on the treadmill. Your doctor should evaluate whether you are physically fit to use the machine and how much effort you are able to undergo. Incorrect exercise or switching of the body can harm your health. •...
LUBRICATING THE TREADMILL Lubricating the running belt & the running board is essential as the friction affects the life span and operations of the treadmill. Therefore, we suggest you to inspect the running belt regularly. WARNING: Always unplug the treadmill from the electrical outlet before cleaning, lubricating, or repairing the unit.
Page 21
The seller is SEVEN SPORT s.r.o. with its registered office in Strakonická street 1151/2c, Prague 150 00, Company Registration Number: 26847264, registered in the Trade Register at Regional Court in Prague, Section C, Insert No. 116888. According to valid legal regulations it depends whether the Buyer is the End Customer or not. “The Buyer who is the End Customer”...
Page 22
Seller is obliged to provide the Buyer with a financial compensation in the form of a refund. SEVEN SPORT s.r.o. Stores inSPORTline SK, s.r.o. Strakonická 1151/2c, Praha 5, 150 00, ČR Headquaters, warranty & service center: Električná 6471, Registered Office: Dělnická...
Need help?
Do you have a question about the ZenRun 50 and is the answer not in the manual?
Questions and answers