Dahua Technology DH-IPC-HDEW Series Quick Start Manual page 31

Step 6 Select the devices that need initialization, and then click Initialize.
Step 7 Set and confirm the password of the devices, then enter a valid email address, and then
click Next.
The final setting interface is displayed.
Password can be modified or reset in System Settings.
Step 8 Select the options according to your needs, and then click OK.
The Initialization interface is displayed after initialization is completed. Click the success
icon ( ) or the failure icon ( ) for the details.
Click Finish.
Step 9
The device status on the Modify IP interface turns to Initialized.
4.2 Modifying Device IP Address
Prerequisites
You can modify IP address of one or multiple devices at one time. This section is based on
●
modifying IP addresses in batches.
Modifying IP addresses in batches is available only when the corresponding devices have the
●
same login password.
Procedure
Step 1 Do Step 1 to Step 4 in "4.1 Initializing Device" to search devices in your network segment.
After clicking Search setting, enter the username and password, and make sure that they
are the same as what you set during initialization; otherwise there will be wrong
password notice.
Figure 4-2 Password setting
24
Quick Start Guide