Statically Assign An Ip Address - D-Link DSL-2320B - 24 Mbps DSL Modem User Manual

Appendix A - Networking Basics

Statically Assign an IP address

If you are not using a DHCP capable gateway/modem, or you need to assign a static IP address, please follow the
steps below:
Step 1
Windows XP - Click on Start > Control Panel > Network Connections.
®
Windows 000 - From the desktop, right-click My Network Places > Properties.
®
Step 2
Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN
IP address on your modem.
Example: If the modem´s LAN IP address is 19.168.0.1, make your IP address
19.168.0.X where X is a number between  and 99. Make sure that the number
you choose is not in use on the network. Set Default Gateway the same as the LAN
IP address of your modem (19.168.0.1).
Set Primary DNS the same as the LAN IP address of your modem (19.168.0.1). The
Secondary DNS is not needed or you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.
D-Link DSL-30B ADSL+ Ethernet/USB Modem User Manual 59