Adsl Ber Test - D-Link DSL-2320B - 24 Mbps DSL Modem User Manual

Section 10 - Status

ADSL BER Test

A Bit Error Rate Test (BER Test) is a test that reflects the ratio of error bits to the total number transmitted.
If you click on the ADSL BER Test button at the bottom of the ADSL Statistics
page, the following pop-up screen will appear allowing you to set the tested
time and to begin the test. Click Start to begin the test.
When you start the ADSL BER Test, the following progress window will display
the connection speed as well as the length of time that the test will run for.
At any time during the test, click on the Stop button to terminate the test.
D-Link DSL-30B ADSL+ Ethernet/USB Modem User Manual 54