Statically Assign An Ip Address - D-Link DSL-2740B User Manual

Adsl 2+ modem with wireless n 300 router

Hide thumbs Also See for DSL-2740B:

Table of Contents

Appendix A - Networking Basics

Statically Assign an IP address

If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:

Step 1

XP - Click on Start > Control Panel > Network Connections.

Windows

2000 - From the desktop, right-click My Network Places > Properties.

Windows

Step 2

Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties.

Step 3

Highlight Internet Protocol (TCP/IP) and click Properties.

Step 4

Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router.

Example: If the router´s LAN IP address is 192.168.1.1, make your IP address 192.168.1.X where X is a

number between 2 and 99. Make sure that the number you choose is not in use on the network. Set

Default Gateway the same as the LAN IP address of your router (192.168.1.1).

Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not

needed or you may enter a DNS server from your ISP.

Step 5

Click OK twice to save your settings.

D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router

Table of Contents