Statically Assign An Ip Address; Windows® 8 Users - D-Link DWA-182 User Manual

Appendix B - Networking Basics
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Windows® 8 Users
• Press the Windows key and then type IP. Click Settings on the right side and then click View.Network.Connections.
• Right-click on the adapter which represents your D-Link wireless network
adapter.
• Highlight Internet.Protocol.Version.4.(TCP./IPv4) and click Properties.
• Click Use.the.following.IP.address and enter an IP address that is on the same
subnet as your network or LAN IP address on your router or network.
Example: If the router's LAN IP address is 192.168.0.1, make your IP address
192.168.0.X where X is a number between 2 and 99. Make sure that the number
you choose is not in use on the network.
• Set Default.Gateway.the same as the LAN IP address of your router or gateway.
• Set Primary.DNS the same as the LAN IP address of your router or gateway.
• The Secondary.DNS is optional (you may enter a DNS server from your ISP).
• Click OK to save your settings.
D-Link DWA-182 User Manual

Statically Assign an IP Address

37