Installing The Modem - D-Link DSL-2320B - 24 Mbps DSL Modem User Manual

Section  - Installing The Modem
• Connect an RJ-11 cable between the wall phone jack and the line-end of the splitter (see diagram
below).
• Attach another RJ-11 phone cable to the modem-end of the splitter and the ADSL port on the rear panel
of the modem.
• The phone-end of the splitter will be connected to the telephone using a third RJ-11 phone cable.
Note: See connections on the installation diagram.
• To use the Ethernet connection, connect the Ethernet cable from the computer directly to the modem.
Connect one end of the Ethernet cable to the port labeled LAN on the back of the modem and attach the
other end to the Ethernet port of your computer.
• Or, you can use the supplied USB cable to connect your computer directly to the modem. Connect one
end of the USB cable to the USB port on the back of the modem and connect the other end to a free USB
port on your PC. The Found New Hardware Wizard will open on your PC. See the Installation Diagram
on page 9.
D-Link DSL-30B ADSL+ Ethernet/USB Modem User Manual

Installing the Modem

Connect the ADSL and Telephone Lines
Connect the PC to the Modem
7