3xLogic VISIX VX-5M622-MB-RIAW-X Quick Start Manual page 5

QUICK START GUIDE | VX-5M622-MB-RIAW-X
INSTALLATION AND USE PRECAUTIONS
1. Do not disassemble the camera at your discretion.
2. If you forcefully install the product with excessive force, malfunction can damage the camera.
3. Do not punch or shake the camera and be careful not to damage the camera with careless storage or mal-
function.
4. Be careful not to install the camera in a rainy or humid place, and do not leave it in a wet place.
5. Installing or using the product in water can cause serious product failure.
6. Do not install the product if there is chemical or vapor in the place where the product is installed, or if it can
be generated.
7. Be careful not to get chemicals on the surface of the product when installing the product. Chemical
solvents such as cleaning agents and adhesive components can cause fatal damage to the surface of the
product.
8. Do not install it near the kitchen or cooking table as edible oil such as soybean oil can also cause product
damage and deformation. It can cause product damage.
9. Be careful not to get foreign substances on the Micro SD card terminal. If there is any foreign substance,
wipe it with a soft cloth.
10. Data will not be saved at the end of the life of the Micro SD card. In this case, purchase a new Micro SD
card.
11. Moisture may occur in the glass of the camera when the new product box is opened (or when the product is
initially running). The generated moisture is removed by a Gore vent attached to the camera within hours of
the power connection.
12. For products enclosed with a desiccant or card-type absorbent, please install it according to the manual.
13. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the appar-
atus.
14. Unplug this apparatus when a cart is used. Use caution when moving the cart/apparatus combination to
avoid injury from tip-over.
/
5 6