Smart Zoom Settings; Enable Overview Mode - HP 914c - iPAQ Business Messenger Smartphone Navigation Manual

Smart Zoom settings

You can set how close Smart Zoom can zoom in when approaching the next turn
(Zoom-in limit), and the maximum zoom level to zoom out when the next turn is further
away (Zoom-out limit). The default values are set to be optimal in most cases.

Enable Overview mode

You can configure how the Overview mode is triggered when the next turn is at a
distance.
The Route event distance will determine when HP iPAQ Trip Guide switches to the
Overview or back to the Navigation view.
The Overview zoom level will determine the fixed zoom level of the map in both
automatic and manually selected (by the Map orientation icon – see here: Page 4 )
Overview modes. You can change the zoom level manually at any time (the Follow
button will not be displayed), but when you enter the Overview mode again, the zoom
level will be reset to this value.
You can also move the map in Overview mode. Then the Follow button will appear,
and when pushed, it will move the map to have your current position in the middle
again.
On the other hand you are not allowed to rotate the map in Overview mode. This
mode is a strictly north-up orientated mode.
Note:
when this automatic feature is disabled, you can still enable the Overview
mode manually (Page 44).
4
95