Find; Find & Go (Main Menu); Selection By Tapping The Map - HP 914c - iPAQ Business Messenger Smartphone Navigation Manual

Find

One of the most frequently used functions of HP iPAQ Trip Guide is selecting the
destination. Once you have the destination, you can start navigating. Getting to this
point should be as fast as possible. HP iPAQ Trip Guide provides you with a versatile
search engine designed to find your chosen destination after only a few taps on the
screen.
Note:
If you select a location in any part of the Find system, you will normally
drop back to the map screen, where you will have several possible actions (set
as start, set as destination, add as via point, continue route with, mark with a
pin, add it to the database of road safety cameras, or add as a POI item).
However, if you enter the Find system using the Find & GO button, HP iPAQ Trip
Guide will immediately put you into Cockpit mode and start navigation.
Find & GO (Main menu)
As just mentioned, the fastest way to find your destination and start navigating is to
tap Find & GO in the Main menu (Page 2 ). This will put you on the Find screen, and
as soon as you pick a destination, HP iPAQ Trip Guide will immediately show the
Cockpit screen and start navigation. This means that if you plan your route to one of
your Favourite destinations, you only need two taps to start navigating.

Selection by tapping the map

It is very easy to set your destination using the map. Just browse to your desired
destination on the map, tap it, and the Cursor menu with the possible actions will then
open automatically.
102
2