Enable Safety Cameras - HP 914c - iPAQ Business Messenger Smartphone Navigation Manual

Speeding tolerance
HP iPAQ Trip Guide will warn you when you exceed the speed limit by the amount
specified here. Select whether you want to specify the tolerance as a Fixed value
(offset to the speed limit) or as a Percentage.
The slider will change depending on which mode you have chosen.
Both positive and negative values can be given in either offset or percentage mode.
Alternative speed limit
If the speed limit of the current road segment equals or is above this limit, the speed
warning will use the alternative tolerance instead of the previous one.
Move the slider to its rightmost position to turn off the alternative speed warning. Then
the settings of the upper slider will determine the warning for all roads.
Alternative speeding tolerance
If the speed limit of the current road reaches the value set at Alternative speed limit,
this setting will replace the basic one set at the top of this screen. The slider and the
selector work exactly as the basic ones (Page 79).
Example: to let you better understand how this feature works, here is an example. If
you use the settings +10 km/h – 100 km/h – +5%, HP iPAQ Trip Guide will warn you
when driving at the following speeds:
Speed limit
40 km/h
60 km/h
90 km/h
100 km/h
120 km/h
160 km/h

Enable Safety Cameras

HP iPAQ Trip Guide can warn you when you approach known speed and red light
cameras previously uploaded or copied into the device, or saved manually in the
Warning at
50 km/h
70 km/h
100 km/h
105 km/h
126 km/h
168 km/h
(=40 km/h + 10 km/h)
(=60 km/h + 10 km/h)
(=90 km/h + 10 km/h)
(=100 km/h + 5%)
(=120 km/h + 5%)
(=160 km/h + 5%)
79