HP 914c - iPAQ Business Messenger Smartphone Navigation Manual page 118

The blue (yellow when using night colours) arrow shows my location,
but I cannot see the route (green or red line), and no voice instructions
are announced.
It is likely that you have no active route. Check the upper left corner of the Cockpit
screen (Page 4 ) if you can see the indication for the next turn or not. If this field is 1
blank, you have no route planned, so you need to create one first. It is a common
mistake to find a destination, show it on the map, but forget to tap the 'Route To'
button in the Cursor menu (Page 4 ) to create the route. Be sure to follow these steps, 7
or always plan your routes with the 'Find & GO' button (Page 1 02 ) that will ensure
your route is calculated automatically as soon as the destination has been selected.
I cannot see the Follow button on the screen, yet the map is not rotated
during driving.
Look for a small, red 'N' letter on the compass icon (Page 4 ) or an aeroplane icon 4
instead of it. It is likely that you had initiated the North-up map orientation or the
Overview mode unintentionally. Tap this icon to revert to Track-up mode with
automatic map rotation.
Creating a multi-point route I have tapped the 'Route To' button once
for each destination but only the last one appears in the list, all
previous points have disappeared.
The 'Route To' button is for starting a new route only. For a single route you tap this
when the destination is selected. Multi-point routes can be created after you have
established a single route. Add points to the single route by using the 'Add Via' and
'Continue' buttons. Applying 'Route To' again will delete the whole route. In your case
only single routes existed before, so they were deleted without a warning message. If
you already have a multi-point route, HP iPAQ Trip Guide warns you before deleting
the whole route.
The speaker icon shows HP iPAQ Trip Guide is not muted yet I hear no
voice guidance.
The muting available from both map screens is just a quick silencer that cancels the
sound output. Voice guidance and key sounds need to be enabled and volume must
be set at the Sound Settings screen (Page 83).
I enabled the speed warning as soon as I bought the product but I
have just been fined for speeding because HP iPAQ Trip Guide failed to
warn me.
For an accurate speed warning the actual speed limits of each street and road must be
present correctly on the map. This is a relatively new feature of digital maps, so it may
118