Cursor (No. 7); Map Scale (No. 8) - HP 914c - iPAQ Business Messenger Smartphone Navigation Manual

Rotating the map in any direction will only freeze the orientation of the map, but it
keeps on moving to keep the GPS position visible. Use Follow to return to North-up or
Track-up orientation (the one previously selected).
When Smart Zoom is enabled, scaling or tilting the map also stops the automatic
zooming or automatic tilting respectively. To reactivate Smart Zoom, tap this button.
This button has a hardware button equivalent: Page 12.
Tip
: In Advanced settings you can set a delay time after which HP iPAQ Trip
Guide pushes the Follow button for you on the Cockpit screen automatically
(Page 96). This can be turned on for re-enabling both Lock-to-Position and Smart
Zoom.

Cursor (No. 7)

As described earlier (Page 3 ), if you tap the map somewhere or select one specific
item in Find, it will become the selected point on the map, marked with a small red dot
and radiating red circles to make it conspicuous. You can use this point as starting
point, via point or destination for your route, you can search for a POI near it, mark it
with a pin, or save it as a POI.
Note:
When GPS position is available, the Follow button will appear indicating
that you have disabled Lock-to-Position. Tapping the Follow button will re-enable
the position lock and move the cursor back to the current GPS position. The same
happens when HP iPAQ Trip Guide restores Lock-to-Position automatically on the
Cockpit screen, if it is set in Advanced settings (Page 96).

Map scale (No. 8)

The scale indicator is only available on the Map screen. In 2D map view it represents
the scale of the map. In 3D view it is the scale of the nearest part of the map only.
0
43