Route Recalculation; Automatic; Ask First - HP 914c - iPAQ Business Messenger Smartphone Navigation Manual

software. You can save cameras using the POI button in the Cursor menu (Page 4 ),
and then the Add Cam button. The types and parameters of speed cameras are
explained here: Page 71.
In this section you can enable or disable the warning for known cameras, and you can
also fine-tune the way HP iPAQ Trip Guide warns you when you approach one of
these cameras.
Note:
Detecting the location of speed cameras may be prohibited by law in
certain countries or regions. Be sure to check if it is legal to turn on this warning
or not before doing so.
Audible Warning
You can disable the audible warning; have a simple warning (when you are warned
only if you exceed the speed limit when approaching a camera); or a complex sound
with repeated beeps as you approach the camera. In case of section control cameras,
you will also hear these beeps while you are between the two cameras (these cameras
work in pairs).
You are warned well in advance. The distance HP iPAQ Trip Guide starts warning you
before reaching the camera depends on your speed. The higher the speed, the earlier
the warning starts.

Route Recalculation

Once a route is planned, this setting will tell HP iPAQ Trip Guide what to do when you
deviate from that route.

Automatic

The route will be recalculated automatically a few seconds after you go astray.

Ask First

HP iPAQ Trip Guide can also ask your preference each time you leave the planned
route. The route will not be recalculated until you make your choice from the menu that
automatically appears (Page 54).
80
7