Circontrol Post eVolve Series Installation Manual page 7

So, hello!
This manual provides commissioning information about CIRCONTROL
Charge Points, which have been designed and tested to allow electric
vehicle charging, specified in IEC 61851.
This document has different sections such as step-by-step installation
procedure and technical data.
Charge Points described in this manual are intended for use by ordinary
persons.
THE FOLLOWING SYMBOLS ARE USED FOR IMPORTANT
SAFETY INFORMATION IN THIS DOCUMENT
ELECTRIC RISK
Take precautions to make the electrical connection inside the
unit. Unit must be disconnected from any power source during
commissioning.
ATTENTION!
Indicates that the damage to property can occur if appropiate
precautions are not taken.
• Complies with IEC 61851, Electric vehicle conductive charging
system (IEC 61851-1 and IEC 61851-21-2).
• Complies with IEC 62196, Plugs, socket-outlets, vehicle couplers and
vehicle inlets (IEC 62196-1 and IEC 62196-2).
• Complies with Directives: 2014/35/EU, LVD;2014/30/EU, EMC.
Complies with The Electrical equipment (safety) regulations 2016
•
guidance and The Electromagnetic compatibility regulations 2016
guidance.
• RFID complies with ISO/IEC 14443A/B.
RFID and Modem 4G complies with 2014/53/EU, RED; and Radio
•
Equipment Regulations 2017 .
03