DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
1. INTRODUCTION This Video to HDMI converter box can convert Composite Video or S-Video (NTSC, PAL or SECAM system) signals to a HDMI output. The device provides a full range of output resolutions, up to 1080p for HDTV resolutions, and UXGA for PC resolutions. With the use of the 3.5mm audio input, stereo audio may be embedded with video selection.
5. FEATURES • Operates in NTSC 3.58, PAL and SECAM system • Supports output resolution: PC resolution: XGA, SXGA, UXGA Component resolutions: 480p, 576p, 720p@50/60, 1080p@50/60 Note: Component resolution frame rate conversion supports output at 50 to 60Hz only. PC resolution supports frame rate output at 60Hz only. •...
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Top Panel CV:Yellow Video to HDMI SV:Red CV/SV Button & LED: Press this button to switch the input source between composite video and S-video. Pressing and holding this button for 3 seconds will activate the information OSD. The LED will illuminate yellow when switching to composite video and red when switch to S-video.
6.3 Left Panel Video DC 5V S-Video S-Video Input: Connect to s-video source equipment with stereo audio such as DVD players or VCRs. Note: The audio input ports are shared with the composite input Composite Video Input: Connect to composite video source equipment with stereo audio such as DVD players or VCRs.
6.5 OSD Menu All functions of this unit can be controlled by using the OSD (On Screen Display) which is activated by switching setting or pressing the CV/SV button on the top of the unit for 3 seconds. Use the CV/SV button to navigate the OSD menu.
7. CONNECTION DIAGRAM HD-SDI Source Camera e.g. Camera DVD Player Set-top Box SV Input CV Intput Power Supply Video S-Video UXGA/1080P Audio In HDMI SXGA/720P XGA/ 480P 576P HDMI Output HDMI TV/Monitor...
9. ACRONYMS ACRONYM COMPLETE TERM Analog-to-Digital Converter Audio/Video Composite Video Decibel Digital Visual Interface High-Definition HDMI High-Definition Multimedia Interface HDTV High-Definition Television Kilohertz LPCM Linear Pulse-Code Modulation NTSC National Television System Committee On-Screen Display Phase Alternating Line Personal Computer SECAM Sequential Color and Memory Signal-to-Noise Ratio Set-top Box...
Need help?
Do you have a question about the CM-398HN and is the answer not in the manual?
Questions and answers