Table of Contents
Advertisement
ENG
6.7 Replacing the cover
When replacing the cover proceed in the reverse order of removing the
cover.
Make sure that when feeding the belt straps in the lower area of the seat pan,
these are fed first through the outer slot and then through the inner slot. The
belt strap must be inside the seat pan and fastened with the belt tongue
(fig.21/no.1).
7. Procedure after an accident
After an accident resulting from a speed of over 10km, the seat pan must be
checked by the manufacturer for possible damage and if required, replaced.
8. Guarantee
For this seat pan we offer a 2 year guarantee for manufacturing or material
defects. The guarantee period commences on the day of purchase.
A sales receipt will be required for complaint.
The guarantee is limited to seat pans, which have been handled appropria-
tely and are returned in clean and sound condition.
The guarantee shall not extend to:
- natural occurrences of wear and tear and damages caused
by excessive strain.
- Damages through inappropriate or improper use.
Materials: All of our materials meet high standards regarding colour resi-
stance against sunlight. Nevertheless all materials discolour when they are
exposed to UV light. This will not be considered as a material defect, but nor-
mal wear and tear. No guarantee can be assumed in this case.
In the case of guarantee please contact your dealer directly.
17
Advertisement
Table of Contents
