Manual Set For Your Personal Recipes - Breville ikon BBM600 Instructions And Recipes Manual

Baker’s oven
Table of Contents

Advertisement

Know your Breville ikon™ Baker's Oven

MANUAL SET FOR YOUR PERSONAL RECIPES

The MANUAL SET function allows you to program your own personal
recipe cycle times and baking temperature into the ikon™ Baker's
Oven. You can choose how long you want for each cycle of the program.
For example, in a humid climate the rising cycles can be reduced or
if a crustier loaf is preferred the baking time and temperature can be
increased.
The Panettone recipe on page R33 is an example of how to use the
MANUAL SET function.
The memory of the ikon™ Baker's Oven will save and recall the times and
temperature of the last personal recipe programmed into the MANUAL SET
function.
OPERATION LCD SCREEN
st Press
Shows the total time for the last recipe programmed and the
NUTS selected.
2nd Press
PRE-HEAT
3rd Press
KNEAD 
4th Press
KNEAD 2
5th Press
RISE 
6th Press
PUNCH DOWN
7th Press
RISE 2
8th Press
SHAPING
9th Press
RISE 3
0th Press BAKE
th Press NUTS (YES OR NO)
2th Press 0°C
3th Press Shows total time for the current recipe programmed and
the NUTS selected. The word SET appears in the lower
right-hand side corner. (Two beeps sound if the BEEPER is
turned on).
The PRESET TIMER can be used with the MANUAL SET function. Use the Up ▲ or Down ▼ Arrow button to set the required time (until finish)
after SET appears on the LCD Screen (after the 13th press).
If the Fruit and Nut Dispenser and/or the Beeps for adding other ingredients are required, ensure KNEAD 2 is programmed for at least 20
minutes. The Dispenser and Beeps activate at 17 minutes into the total kneading cycle.
2
0
0
0
0
:00
0
:00
0
0
continued
Procedure:
)
Press MANUAL SET following the steps shown on page 2 starting with
st press through to 3th press. PERSONAL RECIPE will show on the
LCD screen through out the function.
2)
Use the Up ▲ or Down ▼ Arrow button to increase or decrease
the cycle times, the temperature of the BAKE cycle and to select the
NUTS dispenser and/or add-in beeps. Use the sequence charts at
the beginning of each section as a guide for programming times and
temperature.
3)
Press the BEEPER button if the beeps are required.
4)
Press START/PAUSE button to commence operation.
ACTION
Press Up ▲ Arrow button to enter time
- maximum 60 minutes or Down ▼ button to 0.00
Press Up ▲ Arrow button to enter time
- maximum 60 minutes or Down ▼ button to 0.00
Press Up ▲ Arrow button to enter time
- maximum 60 minutes or Down ▼ button to 0.00
Press Up ▲ Arrow button to enter time
- maximum 00 minutes or Down ▼ button to 0.00
Press Up ▲ Arrow button to enter time
- maximum 60 seconds or Down ▼ button to 0.00
Press Up ▲ Arrow button to enter time
- maximum 00 minutes or Down ▼ button to 0.00
Press Up ▲ Arrow button to enter time
- maximum 60 seconds or Down ▼ button to 0.00
Press Up ▲ Arrow button to enter time
- maximum 00 minutes or Down ▼ button to 0.00
Press Up ▲ Arrow button to enter time
- maximum 50 minutes or Down ▼ button to 0.00
Press Up ▲ Arrow button for YES
or Down ▼ button to NO
Press Up ▲ Arrow button to increase - maximum 50°C or Down ▼ button
to decrease to 0°C
The MANUAL SET function has now been reprogrammed. (If you wish to
check the times and temperature programmed you can do so now by using
the MANUAL SET button to progress through st press to 3th press). Then
press the START/PAUSE button to commence operation.
B

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents