Link LK-TOY11CFL Installation Manual

Toyota sienna 2011 & up driver side center footrest seat

Advertisement

LINK
INSTALLATION MANUAL
LK-TOY11CFL
TOYOTA SIENNA
2011 & UP
DRIVER SIDE CENTER
FOOTREST SEAT

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LK-TOY11CFL and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Link LK-TOY11CFL

  • Page 1 LINK INSTALLATION MANUAL LK-TOY11CFL TOYOTA SIENNA 2011 & UP DRIVER SIDE CENTER FOOTREST SEAT...
  • Page 2 We have prepared quick, easy and to the point tutorial videos imbedded into the software. Take a moment and watch the video that shows all the features of the tablet. To do this, open the LINK IT app and tap on ‘INFO’.
  • Page 3 ITEM PART NUMBER DESCRIPTION LINK TOYOTA SIENNA 2011 + -CENTRAL- LK000L-01 Short Model LINK -Left- LK-UNI-005L 005 Assembly Top Bearing Plate -Left- LK-TOY11CFL-03 Seat Adapter -Left- L-LK912 Communication Cable Support PRD 333-107 Nylon Insert Locknut 5/16-18 Socket Shoulder Screw Zinc Plated 3/8 x 1/2 x 5/16-...
  • Page 4 ITEM PART NUMBER DESCRIPTION LINK TOYOTA SIENNA 2011 + -CENTRAL- LK000L-01 Short Model LINK -Left- LK-UNI-305L 305 Top Bearing Plate -Left- PRD 192-141 Spring Tensions Pin 3/16 x 3/4 PRD 337-193P Socket Head Cap Screw Zinc Plated 1/4-20 UNC x 3/4...
  • Page 5 ITEM PART NUMBER DESCRIPTION LINK TOYOTA SIENNA 2011 + -CENTRAL- LK-TOY11CFL-03 Seat Adapter -Left- LK710B Chain Covert -Black- LK730LB Outside Cover -Left- Black LK731LB Intside Cover -Left- Black LK750LB Pivot Cover -Left- Black L-LK912 Communication Cable Support PRD 110-106 Round washer head tapping screw #8 x 3/4 PRD 251-177 Trim Panel Clip Ø1/4'' x 3/4'' Black...
  • Page 6 ITEM PART NUMBER DESCRIPTION LINK TOYOTA SIENNA 2011 + -CENTRAL- LK-TOY11CL-01 Outside Floor Adapter -Left Central- LK-TOY11CL-02 Inside Floor Adapter -Left Central- LK-TOY11C-05 Floor Adapter Transversal PLate LK-TOY11CB-07 "A" Floor Cover -Central- Noir LK-TOY11CB-08 "B" Floor Cover -Central- Black LK-TOY11CLB-09 "C"...
  • Page 7 Remove the passenger side center OEM seat and place on a workbench. 2. Remove all the plastic shrouds from the seat carriage and also the center brace. LINK Toyota Sienna 2011 & UP Center Left Footrest – p.3...
  • Page 8 4. To remove the interior seat rail the gas tank will have to be lowered on the side next to the exhaust system to gain access to the three bolts. Access to a vehicle lift will facilitate this. Retain the OEM nuts for reinstallation. LINK Toyota Sienna 2011 & UP Center Left Footrest – p.4...
  • Page 9 5. Install the LINK interior floor adapter # LK-TOY11CL-02 and tighten down with the original OEM nuts before remounting the spare tire. 6. The exterior floor adapter # LK-TOY11CL-01 can now be installed and bolted down with the OEM bolts. NOTE: The center bolt will not be used.
  • Page 10 ELECTRICAL INSTALLATION. (Found at the end of this manual) 10. Remove the LINK from the shipping box and set it on a table or work bench. The LINK has been pre-programmed to fit in the application it was ordered for. *IMPORTANT: Before connecting auxiliary 12V power to the LINK, connect the 9V battery.
  • Page 11 ‘BYPASS’) Using the ‘BYPASS’ mode in the LINK IT app, press the ‘PIVOT OUTWARD’ button to move the LINK out just enough to see the eight (8) bolt move the LINK out just enough to see the eight (8) bolt holes.
  • Page 12 13. Connect the previously installed 12v power supply to the LINK, and using the ‘BYPASS’ mode on your ADAPT SOLUTIONS tablet carefully ‘PIVOT’ ‘TRAVEL’ and ’TILT’ the LINK out of the vehicle to install the seat base. 14. With the seat installed on a workbench, unclip the flap at the back of the seat.
  • Page 13 16. Remove the left hand side plastic seat trim, disconnect the footrest cable at the same time. LINK Toyota Sienna 2011 & UP Center Left Footrest – p.9...
  • Page 14 17. Remove the recline cable that releases the seat recline on the right hand side. 18. Remove the arm that goes to the seat folding mechanism and reinstall the nut. 19. Remove the seat belt. LINK Toyota Sienna 2011 & UP Center Left Footrest – p.10...
  • Page 15 20. Remove the two cables from the right hand side. 21. Remove the seat back. 22. Remove the plastic trims from the seat base. LINK Toyota Sienna 2011 & UP Center Left Footrest – p.11...
  • Page 16 24. Unclip the seat cushion from the seat base. 25. Remove the right hand side recline release cable and keep for reinstallation. NOTE: The following photos were taken with a LINK on a workbench. The procedure will be the same with the LINK in the vehicle.
  • Page 17 26. Install the three provided child seat attachment adaptors. Use the provided self-tapping screws to fix them in position. Use the seat cushion holes for alignment. 27. Install the seat cushion onto the LINK seat adapter. Use the bypass mode on the tablet to tilt the seat up to facilitate installation.
  • Page 18 28. Reinstall the seat back to the LINK seat adapter. Use the OEM bolts on the left hand side and the two provided 7/16-20x2’’ bolts on the right hand side. 29. Reinstall the right hand side recline release cable. LINK Toyota Sienna 2011 & UP Center Left Footrest – p.14...
  • Page 19 Verify the positioning of the wire to make sure there is no chance of it pinching or binding once the seat moves. 32. Install the left hand side seat trim # LK-TOY11CF-10 with the provided self-tapping screws. LINK Toyota Sienna 2011 & UP Center Left Footrest – p.15...
  • Page 20 33. Install the right hand side seat trim # LK-TOY11CF-11 and the seat belt receiver at the same time using the OEM bolt. LINK Toyota Sienna 2011 & UP Center Left Footrest – p.16...
  • Page 21 34. The two sides of the fabric flap at the back of the seat will have to be cut three inches to gain clearance. Then pierce four holes and attach the flap up under the seat with zip ties. Tilt the seat up to facilitate this. LINK Toyota Sienna 2011 & UP Center Left Footrest – p.17...
  • Page 22 ‘TRAVEL’ and ‘TILT’. Then make sure that the ‘PIVOT’ is completely in. IMPORTANT NOTE: It is vital that the LINK be exactly at the ‘HOME’ position before moving on to the next step. If the LINK is slightly off its ‘HOME’ position, the starting point of its movements, there is a strong chance that the LINK will not fit through the doorway properly and/or will cause problems for the preset of the LINK.
  • Page 23 9 Volt Battery The LINK is designed to run off of the vehicle’s 12 volt battery. It is equipped with many safeguards to ensure that the controller box always retains its programing sequence. One of those safeguards is the 9 volt memory backup battery.
  • Page 24: Electrical Installation

    3. Attach the ground wire (black -) to the vehicle’s frame, under the doorstep molding using a self-tapping screw. NOTE: It is preferable to locate it in a spot where the sheet metal is doubled-up to insure a better ground. LINK Toyota Sienna 2011 & UP Center Left Footrest – p.20...
  • Page 25: Normal Use

    All systems functional and ready to go. Power Reduce Mode To exit, simply run the LINK a full cycle. Major Problem Do not use the LINK - contact your Mobility Equipment Dealer No Response No 12V Power DIAGNOSTIC MODE (Press and hold the power button) Entering Static Diagnostic Current vehicle 12V power supply level.
  • Page 26: Year Limited Warranty

    ADAPT-SOLUTIONS #1 LTD. 3 YEAR LIMITED WARRANTY Adapt-Solutions # 1 Ltd. (Adapt Solutions), warrants to the original purchaser of a LINK that the equipment is free from defects in material and workmanship for a period of three years from date of purchase.
  • Page 27 LINK Toyota Sienna 2011 & UP Center Left Footrest – p.23...
  • Page 28 LINK Toyota Sienna 2011 & UP Center Left Footrest – p.24...

Table of Contents