Table of Contents
Advertisement
Connection
Before connection
•
Read the owner's manual of the device you are connecting to the projector.
•
Some computers cannot be used or connected to this projector.
Check for an RGB output terminal and supported signal
•
Turn off the power of both devices before connecting.
.
p.78
28
Notes
•
The COMPUTER 1 IN terminal functions identically to the COMPUTER 2 and 3 IN
terminals.
•
The MONITOR OUT connector will output no video signal (Digital signal) from the
COMPUTER 3 IN connector. If no input is selected, the MONITOR OUT terminal
outputs the input signals last selected for each input terminal.
•
Signals are output from MONITOR OUT terminal even in standby mode.
However, from AUDIO OUT terminal, no audio signal is output.
•
A computer monitor cannot accept Y/P
•
The AUDIO IN 1, 2, and 3 terminals double for devices connected to COMPUTER
terminals 1, 2, and 3.
•
When an AUDIO OUT terminal is connected, sound is not output from the projector
speaker.
•
Output volume of AUDIO OUT terminal can be adjusted by the VOL button.
/P
signals correctly.
B
R
Advertisement
Table of Contents
