Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN
THIS OWNER'S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS
BOOKLET FOR FUTURE REFERENCE.
This unit is fully transistorized and does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS
VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read Owner's Manual
After unpacking this product, read
the owner's manual carefully, and
follow all the operating and other
instructions.
2. Power Sources
This product should be operated
only from the type of power source
which does not exceed the voltage
range specified on the
rating label and
the power cord.
If you are not sure of the type of
power supply to your home, consult
your product dealer or local power
company.
3. Source of Light
Do not look into the lens while the
lamp is on. The strong light from
the lamp may cause damage to your
eyesight.
4. Ventilation
Openings in the cabinet are provided
for ventilation and to ensure reliable
operation of the product and to
protect it from overheating, and
these openings must not be blocked
or covered.
The openings should never be
blocked by placing the product
on a bed, sofa, rug or other similar
surface. This product should not be
placed in a built-in installation such
as a bookcase or rack unless proper
ventilation is provided.
4
5. Heat
The product should be situated away
from heat sources such as radiators,
heat registers, stoves, or other
products (including amplifiers) that
produce heat.
6. Water and Moisture
Do not use this product near water.
- for example, near a bath tub, wash
bowl, kitchen sink, or laundry tub; in
a wet basement; or near a swimming
pool and the like.
7. Cleaning
Unplug this product from the wall
outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners.
Use a soft cloth for cleaning.
8. Be sure that you firmly insert
the plug into the wall outlet.
Incorrect or faulty connections may
result in fire or electric shock. Avoid
using an unsound or loose outlet.
9. Power-Cord Protection
Power-supply cords should be
routed so that they are not likely to
be walked on or pinched by items
placed upon or against them, paying
particular attention to cords at
plugs, convenience receptacles, and
the point where they exit from the
product.
10. Overloading
Do not overload wall outlets; to
reduce the risk of electric shock, do
not use the polarized plug with an
extension cord , receptacle, or other
outlet unless the blades can be
inserted completely with three-wire
grounding type to prevent blade
exposure. As this can result in a risk
of fire or electric shock.
5
Advertisement
Table of Contents
