I/O Ports - Supermicro SUPERSERVER 8045C-3R User Manual

S S
UPER ERVER 8045C-3R User's Manual
All JF1 wires have been bundled into a single ribbon cable to simplify this connec-
tion. Make sure the red wire plugs into pin 1 as marked on the board. The other
end connects to the Control Panel PCB board, located just behind the system status
LEDs on the chassis. See Chapter 5 for details and pin descriptions.
5-4

I/O Ports

The I/O ports are color coded in conformance with the PC 99 specifi cation. See
Figure 5-2 below for the colors and locations of the various I/O ports.
Mouse (Green)
USB0/1 Ports
Keyboard
(Purple)
Figure 5-1. Control Panel Header Pins
20 19
Ground
x (Key)
Power On LED
HDD LED
NIC1 LED
NIC2 LED
OH/Fan Fail LED
Reserved
Ground
Ground
2 1
Figure 5-2. I/O Ports
COM1 Port
(Turquoise)
5-4
NMI
x (Key)
Vcc 5V Stby
Vcc 3V
Vcc 3V Stby
Vcc 3V Stby
Vcc 3V
Reserved
Reset (Button)
Power (Button)
VGA Port
(Blue)
JLAN1/2 Ports