Supermicro SUPERSERVER 8045C-3R User Manual page 74

S S
UPER ERVER 8045C-3R User's Manual
Offboard PCI/ISA IDE Card
This option allows the user to assign a PCI slot number to an off-board PCI/ISA
IDE card in order for it to function properly. The options are Auto, PCI Slot1, PCI
Slot2, PCI Slot3, PCI Slot4, PCI Slot5, and PCI Slot6.
IRQ3/IRQ4/IRQ5/IRQ7/IRQ9/IRQ10/IRQ11/IRQ14/IRQ15
This feature specifi es the availability of an IRQ to be used by a PCI, PnP device.
Select Reserved for an IRQ to be used by a Legacy ISA device. The options are
Available and Reserved.
DMA Channels 0~7
Select Available to indicate that a specifi c DMA channel is available to be used
by a PCI/PnP device. Select Reserved if a DMA channel specifi ed is reserved
for a Legacy ISA device.
Reserved Memory Size
This feature specifi es the size of memory block to be reserved for Legacy ISA
devices. The options are Disabled, 16K, 32K, 64K.
Super IO Confi guration Submenu
Onboard Floppy Controller
Select Enabled to enable the onboard fl oppy controller. The options are Enabled
and Disabled.
Serial Port1 Address/Serial Port2 Address
This option specifi es the base I/O port addresses and the Interrupt Request ad-
dresses for Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial
port from accessing any system resources. When set to Disabled, the serial port
physically becomes unavailable. Select 3F8/IRQ4 to allow the serial port to use
3F8 as its I/O port address and IRQ 4 for the interrupt address. The options for
Serial Port 1 are Disabled, 3F8/IRQ4, 3E8/IRQ4, and 2E8/IRQ3. The options for
Serial Port 2 are Disabled, 2F8/IRQ3, 3E8/IRQ4 and 2E8/IRQ3.
Serial Port2 Mode
This option allows the user to confi gure the Serial Port2 Mode. The Options
are Normal, Sharp IR, SIR, and Consumer (-Confi gured).
Advanced Chipset Settings
This item allows the user to confi gure the Advanced Chipset settings for the
system.
7-8