Table of Contents
Advertisement
S
S
UPER
ERVER 8045C-3R User's Manual
C-2 Installing Windows XP/2000/2003 for RAID Systems
Installing a New Operating System
1.
Insert the Microsoft the Windows XP/2000/2003 Setup CD in the DVD/CD
drive, and the system will start booting up from the CD.
2.
Press the <F6> key when the message "Press F6 if you need to install a third
party SCSI or RAID driver" displays.
3.
When the Windows XP/2000/2003 Setup screen appears, press "S" to specify
additional device(s).
4.
Insert the "Intel AA RAID XP/2000/2003 Driver for ESB2" driver diskette into
the fl oppy drive and press <Enter>.
5.
Choose the Intel® ESB2 SATA RAID controller from the list indicated in the
XP/2000/2003 Setup Screen, and press the <Enter> key.
6.
Press the <Enter> key to continue the installation process. (If you need to
specify any additional devices to be installed, do so at this time.) Once all
devices are specifi ed, press the <Enter> key to continue with the installation.
7.
From the Windows XP/2000/2003 Setup screen, press the <Enter> key. The
XP/2000/2003 Setup will automatically load all device fi les and then continue
the Windows XP/2000/2003 installation.
8.
After the Windows XP/2000/2003 OS installation is completed, the system will
automatically reboot.
Note: the current version of the ESB2 SATA RAID Utility can only support the
Windows XP/2000/2003 Operating System.
C-10
Advertisement
Table of Contents
