Table of Contents
Advertisement
S
S
UPER
ERVER 8045C-3R User's Manual
Creating a RAID 10 (RAID 1+ RAID 0)
1.
Select "Create RAID Volume" from the main menu and press the <Enter> key.
The following screen will appear:
2.
Specify a name for the RAID 10 set and press <Enter>.
3.
When "RAID Level" item is highlighted, use the <Up Arrow> <Down Arrow>
keys to select RAID 10 (RAID1 + RAID0) and hit <Enter>.
4.
When "Stripe Size" is highlighted, use the <Up Arrow> <Down Arrow> keys to
select the stripe size from 4 KB to 128 KB for your RAID 10 and hit <Enter>.
The default setting is 64 KB. Note: For a server, please use a lower stripe
size, and for a multimedia system, use a higher stripe size.
5.
When the "RAID Volume Capacity" item is highlighted, enter your RAID
volume capacity and hit <Enter>. The default setting is the maximum capacity
allowed.
6.
Press <Enter> when the "Create Volume" item is highlighted. A warning mes-
sage displays.
7.
When asked "Are you sure you want to create this volume (Y/N)?", press <Y>
to create the RAID volume or <N> to go back to the Create Volume menu.
C-6
Advertisement
Table of Contents
