Supermicro SUPERSERVER 5015P-8R User Manual page 108

S S
UPER ERVER 5015P-8(R)/5015P-T(R) User's Manual
C-2 Installing the Windows XP/2000/2003 for systems
with RAID Functions
New Operating System-Windows XP/2000/2003 Installation
a. Insert Microsoft Windows XP/2000/2003 Setup CD in the CD Driver, and the
system will start booting up from CD.
b. Press the <F6> key when the message-" Press F6 if you need to install a third
party SCSI or RAID driver" displays.
c. When the Windows XP/2000/2003 Setup screen appears, press "S" to specify
additional device(s).
d. Insert the driver diskette-"Intel AA RAID XP/2000/2003 Driver for ICH7R into Drive
A: and press the <Enter> key.
e. Choose Intel(R)82801GR/GH SATA RAID Controller from the list indicated in the
XP/2000/2003 Setup Screen, and press the <Enter> key.
f. Press the <Enter> key to continue the installation process. (If you need to specify
any additional devices to be installed, do it at this time.) Once all devices are speci-
fi ed, press the <Enter> key to continue with the installation.
g. From the Windows XP/2000/2003 Setup screen, press the <Enter> key. The
XP/2000/2003 Setup will automatically load all device fi les and then, continue the
Windows XP/2000/2003 installation.
h. After Windows XP/2000/2003 Installation is completed, the system will automati-
cally reboot.
i. Insert Supermicro CD that came with the package into the CD Drive during system
reboot, and the following screen will appear:
Note: the current version of the ICH7R SATA RAID Utility can only support Windows
XP/2000/2003 Operating System.
C-10