Table of Contents
Advertisement
S
S
UPER
ERVER 5015P-8(R)/5015P-T(R) User's Manual
Legacy Diskette A
This setting allows the user to set the type of fl oppy disk drive installed as diskette A.
The options are Disabled, 360Kb 5.25 in, 1.2MB 5.25 in, 720Kb 3.5 in, 1.44/1.25MB,
3.5 in and 2.88MB 3.5 in.
Parallel ATA
This setting allows the user to enable or disable the Parallel ATA function. The
options are Disabled and Enabled.
Serial ATA
This setting allows the user to enable or disable the Serial ATA function. The
options are Disabled and Enabled.
Native Mode Operation
Select the native mode for ATA. The options are: Serial ATA and Auto.
SATA Controller Mode
Select Compatible to allow the SATA and PATA drives to be auto-detected
and placed in the Legacy Mode. Select Enhanced to allow the SATA and PATA
drives to be auto-detected and placed in the Native IDE Mode.
Note: The Enhanced mode is supported by the Windows 2000 OS or a later
version.
When the SATA Controller Mode is set to "Enhanced", the following items will
display:
Serial ATA (SATA) RAID
Select Enable to enable Serial ATA RAID functions. (For a Windows OS
environment, use the RAID driver if this feature is set to Enabled. If set to
Disabled, use the Non-RAID driver. When this feature--SATA RAID is set
to Enabled, the next item-"SATA AHCI Enable" will not be available.) The
options are Enabled and Disabled.
ICH RAID CodeBase
Select Intel to enable Intel's ICH RAID Controller for a Windows OS. Select
Adaptec to enable Adaptec's RAID Controller for a Linux OS. The options are
Intel and Adaptec. (The Adaptec option is available for the PDSMP-i only.)
SATA AHCI
Select Enable to enable the function of Serial ATA Advanced Host Interface.
Take caution when using this function, which is for advanced programmers
only. The options are Enabled and Disabled.
7-4
Advertisement
Table of Contents
